Automatic Large PVC Fabric Flexible Rolling up Doors Lifting Fabric Hangar Doors For Aircraft
Features:
1.Surface is PVC fabric, double layer and beautiful.
2.Main skeleton is formed with steel tubes. It is designed through precise structure calculation with universal steel structure software, meeting requirements of wind resistance.
3.Safety Drop-proof device, can stop falling of door body when the steel wire of motor breaks suddenly, protecting human life under the door.
4.Multi-limit design guarantees precise running.
5.Inching control design makes sure there will always be a human operating the door when it runs. This can avoid accidents caused by human-absence.
6.High safety class of motor and steel wire, guarantees reliable operation.
Applications:
Shipyard, blasting or painting room, hangar, and large machinery factories.
1. Driving and Transmission system:
Brand:SANMA or SEW or Kaicheng
Technical Data( For reference only):
| NO. | ITEM | UNIT | PARAMETER |
| 1 | Load capacity | t | 2-10 |
| 2 | Lifting height | mm | ≥actual opening height |
| 3 | Lifting speed | m/min | 6 |
| 4 | Pulley ratio | η | 2 |
| 5 | Diameter of cord | mm | Ф15 |
| 6 | Reducer ratio | 1:121 | 1:120 |
| 7 | Power | KW | 5-13 |
| 8 | Electric supply | V | Three-phase,380-415V,50HZ |
1．2． Wire rope hoist :composed of Base, roller, Gear reducer and Conical brake lifting motor .
1．3． Omron Safety sensor is installed onto the end of steel cord for safety.
1．4． Stopper is installed onto the roller to control opening and closing limit.
1．5． Two lifting points are made at the bottom skeleton for emergency hoisting in case of system failure.
2．Control system:Schneider system
2．1． When not working, the control system can keep motor self-locking .
2．2． In-built stopper control the opening and closing at the set limit of top and bottom.
2．3 . Two control boxes for one door, installed at both outside and inside . And optic alarm is installed on the control box.
2．4. Waterproof
2．5. Control panel:three buttons: UP/DOWN/STOP
3. Door body:
3.1. composed of horizontal skeleton, top skeleton and bottom skeleton. And bottom skeleton is covered with PVC fabric for seal structure. Columns and beams of two sides and top is covered with color steel tile as seal.
3.2. panel is made of double layer high-strength PVC fabric. middle of PVC fabric is horizontal steel skeleton to enforce the panel.
3.3. Technical data of PVC fabric PVC:
| NO. | ITEM | UNIT | PARAMETER |
| 1 | Thickness | mm | 1.0 |
| 2 | Weight | g/㎡ | 900 |
| 3 | Material | / | Blue PVC |
| 4 | Heat-resistance | ℃ | +70 |
| 5 | Cold-resistance | ℃ | -30 |
| 6 | tensile strength | N/5cm | 4000/3500 |
| 7 | Tear strength | N | 600/600 |
| 8 | Peel strength | N/5cm | 90 |
| 9 | Elongation | ‰ | 15~20 |
| 10 | Water-pressure resistance | mmH2O | 3×104 |
| 11 | Material wind resistance | KN/㎡ | 0.18 |
| 12 | Overall wind resistance | Grade | 11 (115km/h) |
| 13 | Fire retardant time | S | 3s Self-extinguishing |
Product Tags:
|
|
Large Pvc Fabric Aircraft Hangar Door Flexible Lifting 3 Phase Images
|
